Free tool · no sign-up

Call forwarding code generator

Generate the exact code to turn on, remove or check call forwarding on a mobile: **21*, ##21#, *#21#, ##002#. With the full table, warnings and a link to dial it.

Content updated:

“Erase every forward” also removes the forward to voicemail.
With unconditional forwarding your phone never rings.
9 digits for a Spanish number; + or 00 and the country code for any other country.
Only for “when you do not answer”. The standard allows 5 to 30, in steps of 5.

How to use it

  1. Choose what you want to do: turn on a forward, turn it off, check whether one is set, or erase every forward on the line.
  2. Choose the forwarding type. Unconditional forwarding diverts every call. Conditional forwards only act when you are busy, when you do not answer, or when the phone is off or out of coverage.
  3. To turn one on, enter the destination number. A 9-digit Spanish number is converted to international format: 600 000 000 becomes +34600000000. For a number in any other country, start with + or 00 and the country code.
  4. Copy the code and dial it on the keypad of the Phone app, on the mobile whose line you want to forward. Press the call key and wait for the network’s message.

The destination number never leaves your browser: the code is put together on the page itself. The full table for the chosen type is always shown below the result. The tool is written for Spanish mobile lines, but the codes are the same on any GSM, UMTS or LTE network.

Which code goes with each forward

These codes do not belong to any operator. They are set by the mobile standard: Annex B of 3GPP TS 22.030 (version 17.0.0, accessed on 13 November 2026) gives each forward a service code, and clause 6.5.2 defines the symbols that go around it for each kind of request.

ForwardTurn onRemoveCheck
All calls (unconditional)**21*NUMBER###21#*#21#
When busy**67*NUMBER###67#*#67#
When you do not answer**61*NUMBER# or **61*NUMBER**SECONDS###61#*#61#
When off or out of coverage**62*NUMBER###62#*#62#
All conditional forwards**004*NUMBER###004#One by one
All forwards**002*NUMBER###002#One by one

The tool applies these rules from the standard:

  • Turning on is really a registration: **code*number# stores the destination number in the network and leaves the forward active. 3GPP TS 22.082 (version 17.0.0, accessed on 13 November 2026) states that registration activates the service.
  • Removing with two hashes, ##code#, turns the forward off and erases the stored number. With a single hash, #code#, the forward is turned off but the number stays stored, and *code# turns it back on without entering it again.
  • Checking with *#code# changes nothing: the network replies whether the forward is active and to which number.
  • Waiting time: it only exists for the “no reply” forward. It goes after the number, separated by two asterisks, because it is the third information field and the second is left empty. TS 22.082 allows values between 5 and 30 seconds, in steps of 5. If you leave it out, the last value you set applies, or the operator’s default.
  • Destination number: TS 22.030 recommends international format, with + and the country code, for storing forwarding numbers. That is why the tool adds +34 to Spanish numbers.

Spanish operators publish these same codes. Vodafone’s help page for mobiles (in Spanish) gives **21*, **67*, **61* and **62* to turn forwards on, ##21#, ##67#, ##61# and ##62# to turn them off, and ##002# to remove them all. Orange’s help page (in Spanish) adds the status codes (*#21#, *#67#, *#61#, *#62#) and the format with a waiting time, **61*NUMBER**TIME#. Both pages were accessed on 13 November 2026.

How to remove call forwarding

It depends on which one is set:

  • All your calls go to another number and your mobile does not ring: that is unconditional forwarding. Dial ##21# and press the call key.
  • You do not know which one is active, or you want a clean line: dial ##002#. It erases the unconditional forward and the three conditional ones in one go.
  • You only want to remove one conditional forward: ##67# for busy, ##61# for no reply, ##62# for off or out of coverage.

Bear in mind that voicemail works as a conditional forward to the voicemail number. Movistar warns of this in its article on removing call forwarding (in Spanish, accessed on 13 November 2026): ##002# also turns voicemail off, and Multisim lines are not managed with codes but by calling 1004. To keep voicemail, remove only the unconditional forward with ##21#.

What the “call forwarding active” notice means

TS 22.082 provides for the phone to notify anyone with an active forward each time they make a call, with one indication for unconditional forwarding and a common one for the conditional forwards. That is why many mobiles show a message such as “conditional call forwarding active” when you dial. It is not a fault: it may simply be the forward to voicemail. To find out which number each forward goes to, check the status with *#21#, *#67#, *#61# and *#62#. If a number you do not recognise appears, erase it with ##002# and contact your operator.

How to check that it worked

  1. Read the message the network returns after you dial the code. It should confirm the registration or the erasure.
  2. Dial the status code for that forward, for example *#21#. The reply says whether it is active and gives the destination number.
  3. Make a test call to your line from another phone. For a “no reply” forward, let it ring; for “busy”, call while you are on another call; for “off or out of coverage”, switch the mobile off.
  4. Check that the destination phone rings and yours does not.

How to forward calls from a landline to a mobile

On a landline the codes look similar, but they are not the mobile standard’s, and each operator publishes its own:

  • Movistar: its article on forwarding calls from a landline to a mobile (in Spanish, updated on 20 July 2020, accessed on 13 November 2026) says to lift the handset, wait for the dial tone and dial *21*, the number and # for immediate forwarding; *67* when busy and *61* when there is no reply. They are removed with #21#, #67# and #61#. The call forwarding service must be active on the line.
  • Vodafone: the landline help page (in Spanish, accessed on 13 November 2026) gives *21*, *67*, *61* and *62* followed by the number to turn forwards on, and ##21#, ##67#, ##61# and ##62# to turn them off. The destination can be a Vodafone mobile or landline, or a mobile on another operator.

Note the difference: on a landline, forwards are turned on with a single asterisk. This tool generates the mobile codes; for a landline, use the ones in your operator’s help pages. If the landline number belongs to a cloud phone system, the forward is not dialled on the phone: it is set up in the admin panel, as the guide on how virtual business telephony works explains.

Limits: when these codes do not work

  • They only apply to mobile lines on GSM, UMTS and LTE networks, which are the ones TS 22.030 covers. On landline, fibre or voice-over-IP lines, and on extensions of a phone system, forwarding has its own codes or is managed in a panel or an app.
  • The forwarded leg is paid for. TS 22.082 allows it to be charged to the person who forwards, and operators do so: the caller pays as far as your number, and you pay from your number to the destination. Vodafone also publishes a set-up charge of €0.182 including VAT per forwarded call, and Orange says that turning forwarding on is free but the call to the destination is not. The price depends on your tariff: check it before leaving a forward on for days.
  • Not every destination is accepted. Vodafone excludes international numbers, short codes, and 118, 803, 806, 807 and 905 numbers, and limits chained forwards between Vodafone mobiles to four. Other operators have their own lists. The tool blocks emergency and premium-rate destinations and warns about international numbers and Spanish 800, 900, 901 and 902 numbers, but it cannot know what your operator accepts.
  • The waiting time may be more limited than in the standard. Orange, for example, states values from 5 to 20 seconds in its help page. If the network rejects the code, try a lower value or leave the seconds out.
  • The network may reject the request. TS 22.082 lists, among other causes, that the service is not subscribed to, that the destination is invalid or is your own number, and a conflict with active call barring. If the phone replies with an error, manage the forward in the phone’s call settings or in the operator’s customer area.
  • The dial link does not work on every phone. Apple’s documentation on phone links (accessed on 13 November 2026) states that the iPhone does not dial links containing * or #. In that case, copy the code and paste it into the keypad.
  • A forward knows nothing about opening hours. It stays on until you remove it. To forward only at night, on public holidays or during holidays you need a phone system with time rules: see the guide on routing out-of-hours calls.

Forwarding does not change how your number is shown when you make a call either.

The values you enter are calculated in your browser and are not sent to CallsIQ. Google Analytics records visits and that the tool was used, never the values, as described in the privacy policy.

Cite this tool

If you use a result in a report, an article or a class, link to the tool so others can check the calculation. Copy the text or the HTML:

Text

Call forwarding code generator. CallsIQ. https://callsiq.com/en/tools/call-forwarding-code-generator/

HTML

Source: Call forwarding code generator (<a href="https://callsiq.com/en/tools/call-forwarding-code-generator/">CallsIQ</a>)

Sources and limits of this tool

The linked sources support the formula, ranges or prices the tool uses.

How to report a correction